News

For Immediate Release...

Home > News

SLAC National Accelerator Laboratory Selects Corelis

Corelis Boundary-Scan Tools Reduce Prototype Debug Time.

Jump to Success Story

Cerritos, CA, February 1, 2010 – Corelis, Inc., a leading supplier of high-performance boundary-scan test and measurement tools, announced the deployment of their ScanExpress boundary-scan toolset at the SLAC National Accelerator Laboratory for use in the Reconfigurable Cluster Element (RCE) initiative. The initiative is led by Mike Huffer and supported by Information Systems Specialist, Chris O’Grady.

The RCE circuit board modules are currently used to store detector data collected during proton collisions traveling near the speed of light in the two-mile linear accelerator at the University of Stanford. The technology is also being considered for the Very Large Telescope (VLT) Array in Chilé, the Large Hadron Collider (LHC) at the CERN research center of the Swiss/French border, and the Large Synoptic Survey Telescope (LSST) in Chilé which will study Dark Matter and Dark Energy.

Prior to boundary-scan testing, O’Grady was limited to probing circuit board test points with an oscilloscope resulting in an average debug time of two days for each problematic board. Now with boundary-scan testing, the debug time has been reduced to about one minute, or roughly the time it takes to set up a board and run the boundary-scan test.

O’Grady explained, “Two days of troubleshooting per board is excessive, especially when highly skilled personnel need to be involved. When five boards are bad, two weeks of my time is tied up causing major delays on other projects. It simply got to a point where we needed to either reduce the debug time or assign the task to someone else.”

“The Corelis tools have allowed me to recover lost time. When five boards have problems, not only do Corelis tools save me two weeks worth of work, but I can deliver five boards that much faster!”

About Corelis

Corelis, Inc., a subsidiary of Electronic Warfare Associates, Inc., offers bus analysis tools, embedded test tools and the industry’s broadest line of JTAG/boundary-scan software and hardware products combining exceptional ease-of-use with advanced technical innovation and unmatched customer service. Corelis’ development and test tools are used by companies such as Agilent, Dell, IBM, Jabil, Intel, Microsoft, Lockheed Martin, Rockwell Collins, Hewlett-Packard, Motorola, Qualcomm, Nokia, Panasonic, TI, Ford, Plexus, Broadcom, Ericsson, Flextronics, and many others. Corelis products are found globally in every industry developing or manufacturing electronic products.

About SLAC National Accelerator Laboratory

SLAC National Accelerator Laboratory is a multi-program laboratory exploring frontier questions in photon science, astrophysics, particle physics, and accelerator research. Located in Menlo Park, California, SLAC is operated by Stanford University for the U.S. Department of Energy Office of Science.

# # # #

Testimonials

	The Corelis software was extremely user friendly and much more robust. Everything was very intuitive in how it worked.” “The tools put me at ease.” “The Corelis tools have allowed me to recover lost time.” The Corelis hardware was surprisingly powerful. They were able to support multiple TAPs with a single piece of hardware and we were able to customize the interface voltage of each connector.”

Media Contact

Ryan Jones
Senior Technical Marketing Engineer
+1 (562) 926-6727 (International)
+1 (888) 808-2380 (U.S. & Canada)
+1 (562) 404-6196 fax
Ryan.Jones@corelis.com