| |
Corelis’ ScanExpress
Programmer™ Raises the Bar
for In-System Programming Tools
ScanExpress Programmer™
provides an all-in-one solution for programming
CPLDs, FPGAs, Serial EEPROMs and flash devices at theoretical
speeds.
Jump to product page
Cerritos, CA, March 13, 2007 – Corelis Inc., a leading
supplier of high-performance boundary-scan and emulation tools,
announced today the availability of ScanExpress Programmer™, a
new universal in-system programming (ISP) tool which supports
programming of CPLD, FPGA, serial EPROMs and flash memory
devices. ScanExpress Programmer™ supports the most common
programming methodologies, including SPI, I2C, JTAG and CPU
assisted. Users are now able to use a single software and
hardware package to program all the different programmable
devices on their target.
ScanExpress Programmer™ is used for in-system programming of
non-volatile memory devices utilizing serial protocols such as
SPI, I2C, and JTAG. The tool can program flash memory devices on
a board with a working JTAG scan-chain where the pins on the
memory device are accessible through the boundary-scan
component(s) I/O pins. Furthermore, the tool can program memory
devices connected to a CPU using the CPU’s JTAG emulation
capabilities to program the flash memory at the theoretical
speeds. Additional features of the tool include dumping memory
contents to a file, powerful fault detection and diagnostic, and
parallel (gang) programming support where devices on multiple
boards are programmed and verified in parallel. Utilizing
Corelis’ high- performance boundary-scan controllers, test clock
(TCK) rates up to 100 MHz are supported.
"As programmable devices and flash
memories continue to populate the PCB industry, it is important
that engineers have a single, easy-to-use tool that allows them
to program a memory device they encounter," said Karla May,
Boundary-Scan Product Marketing Manager at Corelis. “ScanExpress
Programmer™ eliminates the need for multiple programming tool
sets, reducing the learning curve along with setup and
programming times."
ScanExpress Programmer™ is immediately available with PCI, USB
2.0 and Ethernet-based controllers. Prices start from $5,000.
Corelis, a EWA company, offers a
broad line of test, programming, development, and bus analysis
products that combine exceptional ease-of-use with advanced
technical innovation. Corelis also provides custom engineering
services and is well-known for its outstanding customer support.
# # # #
Copyright © 2007 Corelis, Inc. All
rights reserved.
All company and/or product names
may be trade names, trademarks and/or registered trademarks of
the respective owners with which they are associated. Features,
pricing, availability, and specifications are subject to change
without notice. |
|
|
|
Media Contact
Ryan Jones
Senior Technical Marketing Engineer
(562) 926-6727 voice
(562) 404-6196 fax
Ryan.Jones@corelis.com
Sign up for Corelis Newsletter
Did you know?
|
|
