Corelis - An EWA Company
Generation
Execution
Add Ons
 
 

Home > Products > JTAG Boundary-Scan Products > ScanExpress Software

         
 


Corelis offers an extensive line of ScanExpress software modules that can be custom tailored to create the right boundary-scan package for any user. Corelis' ScanExpress software is compatible with Microsoft Windows XP, Windows Vista, and Windows 7 as well as all of Corelis' hardware platforms.


 Boundary-Scan Testing Tools


Generation

ScanExpress TPG    Test Pattern Generation

         

ScanExpress TPG

 

ScanExpress TPG™ is a next generation intelligent test pattern generator that takes the process of boundary-scan automation to a new level in both performance and ease of use. ScanExpress TPG automatically generates test patterns that facilitate pin-level fault detection and isolation of all boundary-scan testable nets on a printed circuit board (PCB). ScanExpress TPG also creates test vectors to detect faults on pins of non-JTAG components such as clusters and memories that are surrounded by IEEE-11149.1 compatible devices.

Learn More about ScanExpress TPG

 


ScanExpress JET    JTAG Embedded Testing

         

ScanExpress JET™ represents a quantum leap in automatic circuit board testing by extending boundary-scan structural test coverage to virtually every signal on the board that is accessible by an on-board CPU. ScanExpress JET utilizes proprietary "JTAG Embedded Test" (JET) technology, which uses a processor's JTAG debug port to download and control native processor code to perform at-speed functional testing of the UUT.

Learn More about ScanExpress JET

 

ScanExpress JET

 


ScanExpress DFT Analyzer    Design for Test Analysis

         

ScanExpress DFT Analyzer

 

ScanExpress DFT™ Analyzer is able to accurately calculate the test coverage of boards and systems that include a mix of both boundary-scan and non-boundary-scan devices. The software additionally helps development engineers detect low coverage areas on their designs allowing them to make decisions on increasing fault coverage before the board is sent for layout.

Learn More about ScanExpress DFT Analyzer

 
 

Execution

ScanExpress Runner    Test Program Execution

         

ScanExpress Runner

 

ScanExpress Runner™ provides a runtime executive environment that is friendly for design, production, and field service. ScanExpress Runner allows users to create a test sequence and execute that test sequence any number of times with consistency. A truth table diagnostic display is included to help pinpoint failures down to the net and pin level.

Learn More about ScanExpress Runner

 


ScanExpress Runner Gang    High Volume Test Program Execution

         

ScanExpress Runner Gang™ is the workhorse software piece to perform parallel gang testing and In-System Programming of CPLDs and Flash devices. This solution is fully concurrent and allows simultaneous testing of multiple boards using a single PC and a single operator. ScanExpress Runner Gang addresses high-throughput boundary-scan applications including high-volume production.

Learn More about ScanExpress Runner Gang

 

ScanExpress Runner Gang

 


ScanExpress Viewer    Visual Fault Identification System

         

ScanExpress Viewer

 

ScanExpress Viewer™ is a powerful graphical fault identification system that helps to isolate the source and location of faults encountered during boundary-scan test of printed circuit board assemblies. The device and pin location capabilities provide test operators the immediate board location of the faulty pin or net.

Learn More about ScanExpress Viewer

 


ScanExpress ADO    Advanced Diagnostics

         

ScanExpress ADO is an add-on option for the ScanExpress Runner and ScanExpress Runner Gang execution environments. The Advanced Diagnostics Option automates test vector analysis by intelligently deciphering standard truth table diagnostic information and presenting specific fault information to the user in a detailed verbose format.

Learn More about ScanExpress ADO

 

ScanExpress ADO

 


ScanExpress RunnerClick    Simplified Execution Interface

   

 

   

ScanExpress RunnerClick

 

RunnerClick is a special purpose Windows application program specifically for contract manufacturers that is designed to minimize operator errors and further simplify the test process.

Learn More about ScanExpress RunnerClick

 
 


Add-Ons

ScanExpress Merge    System Level Testing across Assemblies

         

ScanExpress Merge™ makes system-level boundary-scan test development a snap by automatically combining multiple target assemblies into a single boundary-scan compatible target system. The tool provides automatic handling for each board netlist, scan-chain, and interconnect information.

Learn More about ScanExpress Merge

 

ScanExpress Merge

 

 

ScanExpress Debugger    Interactive Debugging

         

ScanExpress Debugger

 

ScanExpress Debugger™ provides a simple, stand-alone environment for complete pin control over any boundary-scan device. The interactive graphical user interface lets users mimic the functionality of a logic analyzer by observing all boundary-scan controllable inputs while also providing the capability to drive output pins to specific logic states. The software can be used to quickly apply patterns to specific areas of a board giving immediate feedback when faults are detected.

Learn More about ScanExpress Debugger

 


 Boundary-Scan In-System Programming (ISP) Tools


ScanExpress Programmer    In-Circuit Programming Tool

         

ScanExpress Programmer™ is a universal in-circuit programming tool that can program and verify Flash memories, serial EEPROMs, CPLDs, FPGAs, and other programmable logic devices. Programming methods include JTAG, I2C, SPI, and Target Assisted. The extensive device library includes chip manufacturers such as Actel, Altera, Spansion, Intel, Microchip, STMicroelectronics, Texas Instruments, Xilinx, and many more.

Learn More about ScanExpress Programmer

 

ScanExpress Programmer

 

 

ScanExpress Flash Generator    Flash Programming File Generation

   

 

   

ScanExpress Flash Generator

 

The ScanExpress Flash Generator™ creates a Board File, which is used to provide ScanExpress Programmer™ (or other compatible applications) with the necessary information to program a given target board configuration.

Learn More about ScanExpress Flash Generator

 
 


 Utilities


Corelis Utilities and Tools

         

Corelis offers several files conversion utilities as well as diagnostic software.

Learn More about Corelis Utilities

 
 
     

Corelis Software/Hardware Flowchart

Diagram of ScanExpress Software
ScanExpress JET or TPG with Runner and optional software packages
This diagram represents how ScanExpress software works together in providing a solution optimally geared according to your needs.  Click on the diagram to visit individual software/hardware pages, or use the links below.

  • ScanExpress TPG
  • ScanExpress JET
  • ScanExpress DFT Analyzer
  • ScanExpress Merge
  • ScanExpress Runner
  • ScanExpress Runner Gang
  • ScanExpress ADO
  • ScanExpress RunnerClick
  • ScanExpress Viewer
  • ScanExpress Debugger
  • ScanExpress Programmer
  • ScanExpress Flash Generator

  • Download Product Datasheet Video Demo - Launch Now


    BSDL files
    Looking for Utilities?
                    Click Here



    Need Assistance?

     
      If you would like assistance with implementing JTAG testing in your design, or you are simply short of resources, our talented and experienced engineering staff can help you with all your JTAG needs. Request Help

    Need Assistance

    * Name:
    * Company:
    * City:
    * State/Country:
    * Phone:
    * Email:
    Contact me by:

    Inquiring About:

    Additional Comments:
    Need other contact information?  Click Here
     
     

     


     

     

         
     

    Corelis offers free three-day training classes that include a boundary-scan tutorial and hands-on lab exercises using Corelis ScanExpress hardware and software.  The training class covers all aspects of boundary-scan testing using Corelis ScanExpress tools.

     
     

    Register Now

     

     

     

         
     

    Corelis offers an extensive line of boundary-scan software packages that can also be custom tailored to create the right package for any user.

     
     

     

    Learn More

     

     

     

     

    Request a Demo - Signup to request a Web Demo

     

     

     
       
     

    Copyright Corelis 2015.  All rights reserved.

    Privacy

    Sitemap EWA Technologies Blackhawk DSP EWA Corporate