Home > Products > Blackhawk JTAG Emulation Tools for TI DSPs > JTAG Emulator Products > USB100v2 (Model D) JTAG Emulator

Blackhawk USB100v2 (Model D) JTAG Emulator

For more information, please visit:
http://www.blackhawk-dsp.com/products/USB100v2D.aspx

The Blackhawk™ USB100v2 (Model D) controller is a very low-cost controller for basic debugging of Texas Instruments DSPs. Requiring no external power source, the USB100v2 (Model D) can support most of the basic features of higher priced emulators and requires no additional drivers when installed using CCS v4 or later.

As an added bonus, Texas Instruments is offering Code Composer Studio™ for FREE for use with the USB100v2. Please visit the TI wiki page for the XDS100 for news and details on this offer here: http://processors.wiki.ti.com/index.php/XDS100

The USB100v2 (Model D) is a TI XDS100v2-compatible emulator fully supported under CCS v4 and future Texas Instruments roadmap software development environments. Blackhawk’s USB100v2 (Model D) provides additional features and performance not found in other XDS100v1 emulators. The USB100v2 (Model D) provides for faster code downloads and assembly code stepping in that the USB100v2 (Model D) uses a high-speed USB2.0 (480 Mb/s) port instead of slower USB1.x (12 Mb/s) implementations.

Measuring just 1.6”L x 0.80”W x 0.65”H (4.6cm x 2.0cm x 1.5cm), not including the 5 inch cable, the Blackhawk USB100v2 (Model D) is the smallest and most compact emulation product from a US manufacturer and is fully assembled and tested in the USA. It will support 1.8-3.3v targets with native cTI compact 20-pin connections and also includes standard 14-pin emulation adapter.

Additionally, with an optional 20cTI to 20ARM connector (available from Blackhawk), the USB100v can connect to 20-pin ARM Multi-Ice platforms.

Features

• HIGH-SPEED USB 2.0 (480Mb/s) Plug n' Play Host Interface

• 1.8/3.3 volt device I/O support

• Native 2x10 20-pin compact cTI header

• Includes 2x7 14-pin JTAG adapter

• Code Composer Studio v4 support

• Power Status LED

• Online Support from TI. See web link: www.tiexpressdsp.com/index.php/XDS100

Benefits

• Easy on your budget

• Simple to install and use

• No drivers are required

• Meets the needs of most projects

Applications

Audio, Automotive, Broadband, Communications, Telecom, Computers & Peripherals, Consumer Electronics, Industrial, Medical, Military, Security, Video and Imaging, Wireless.

System Requirements and Compatibility

Please visit http://www.blackhawk-dsp.com/products/usb100v2D.aspx#system_req 

In the Box

• USB100v2 (Model D) JTAG Emulator

• 20-pin cTI to 14-pin Adapter

• USB Cable

• Quick Start Guide

Blackhawk™ USB100v2 (Model D) JTAG Emulator

Part No.: BH-USB-100v2D

http://www.blackhawk-dsp.com/products/USB100v2D.aspx

About Blackhawk

	Blackhawk™ was the first to introduce a USB JTAG Emulator for Texas Instruments DSP’s and is a member of the Texas Instruments Third Party Developers Network.

Need Assistance?

	If you would like assistance with implementing JTAG testing in your design, or you are simply short of resources, our talented and experienced engineering staff can help you with all your JTAG needs. Move Close Need Assistance * Name: * Company: * City: * State/Country: * Phone: * Email: Contact me by: Email Telephone Inquiring About: (No selection) Products Services Become a Distributor RMA Support Other Additional Comments: Need other contact information?  Click Here