ARINC-629 Test and Simulation Products

Corelis Arinc-629 PCI-based and VXI-based modules provide broad ARINC-629 bus testing capabilities, multiple terminal simulation, monitoring of ARINC-629 bus traffic, and fault insertion and detection.

Corelis' ARINC-629 PCI-629 is an intelligent single-slot PCI compatible module that provides broad ARINC-629 bus testing and simulation capabilities.

The CVXI-629 is a single slot "C" size VXI Revision 1.4 compatible module that provides broad ARINC-629 bus testing and simulation capabilities.

PCI-629 ARINC-629 Tester Card

The ARINC-629 PCI-629 is an intelligent single-slot PCI compatible module designed to provide broad ARINC-629 bus testing capabilities, multiple terminal simulation, and monitoring of ARINC-629 bus traffic and fault insertion and detection. One ARINC-629 channel is provided on-board that can be switched under software control to one of four 629 interfaces at the front panel of the card. The module utilizes a Boeing approved DATAC device for all normal mode data transmission and reception and it supports Periodic, Aperiodic, C mode, Block mode, Alternate, and Independent mode. The card supports 120 terminal simulation and arbitrary traffic generation. The user can connect the PCI-629 card to the ARINC-629 bus and test, simulate, monitor, and insert faults onto the bus at the maximum data rate.

Key Features

Four (4) Multiplexed ARINC-629 Channels
Intelligent Card with on-board RISC Processor
Each selected Channel (software controlled) can send and receive data simultaneously at maximum speed
Multiple Terminals Simulation capabilities, can simulate up to 120 Terminals
Extensive ARINC-629 Bus Error Injection and Detection capability
Programmable Traffic Generator mode can transmit arbitrary ARINC-629 data
On-board 4M Byte Shared Memory, expandable to 32M Bytes
High-performance interface between a host computer and ARINC-629 bus
32-bit PCI interface, fully compliant to Revision 2.1 of the PCI Bus specification
Compatible architecture to the Corelis VXIbus based CVXI-629 card
Host Software support with Extensive "C" Library Calls and Utilities
High Reliability Boundary-Scan (JTAG) Compatible "Designed-for-Test" Module

CVXI-629 ARINC-629 Tester Module

The CVXI-629 is a single slot "C" size VXI Revision 1.4 compatible module designed to provide broad ARINC-629 bus testing capabilities, multiple terminal simulation, and monitoring of ARINC-629 bus traffic and fault insertion and detection. Up to four (4) fully independent ARINC-629 channels are provided on a single slot Multiple Device CVXI-629 module that contains four independent VXIbus Message Based devices, one device per ARINC-629 channel. The module utilizes the Boeing approved DATAC device for all normal mode data transmission and reception supporting Periodic, Aperiodic, C mode, Block mode, Alternate, and Independent mode. The card supports 120 terminal simulation and arbitrary traffic generation, on a per channel basis. The user can connect the four CVXI-629 channels to different 629 busses and test, simulate, monitor and insert faults on all busses simultaneously and at the maximum data rates, continuously.

Key Features

Four (4) Fully Independent ARINC-629 Channels
All Channels Send and Receive Data Simultaneously at Full Speed
Each of the four Channels can Simulate up to 120 Terminals
Extensive 629 Bus Error Injection and Detection Capability on all four Channels
Programmable Traffic Generator Mode can Transmit Arbitrary ARINC-629 Data on any or all channels Simultaneously
Each Channel is an Independent VXIbus Device with its own 32-bit 29030 RISC CPU
Message Based VXIbus Devices with Shared Memory Support Fast Host Data Transfers
4M Byte Shared Memory per Channel (16M Byte Total), Expandable to 16M Byte per Channel (64M Byte Total)
Host Software Support with Extensive "C" Library Calls and Utilities
High Reliability Boundary-Scan (JTAG) Compatible "Designed-for-Test" Module