Home > Products > Runner-Lite > OMAP35x

Runner-Lite: OMAP35x

Runner-Lite for OMAP35x is a free test executive tool for performing boundary-scan tests, JTAG Embedded Tests (JET), and in-system device programming on the TI OMAP35x EVM. The downloadable test procedure works with Rev. D and Rev. G OMAP35x EVM board revisions. Tests include:

• Scan-chain Integrity

• Device Interconnection

• Pull-up / Pull-down Resistor Check

• Real-time Memory Validation

• UART Loopback

• Flash ID Check

• Ethernet MAC Loopback

• Audio Tone

• Touchscreen Input

• Keypad Input

• USB Connection

• SD/MMC Memory Card Insertion

Figure 1: Diagram of TI OMAP 35x EVM JET Peripheral Tests

System Requirements

Runner-Lite is a Microsoft Windows 32-bit application. The PC on which it will be installed should meet the following minimum requirements:

• Microsoft Windows XP, Windows Vista, or Windows 7 installed

  • Both 32-bit and 64-bit environments are supported

  • User Account Control (UAC) must be disabled on Windows Vista and 7

• Pentium III 1GHz processor or higher

• 512 megabytes (MB) of RAM

• 300 MB of free hard disk space

• One of the following supported JTAG emulators:

  • Blackhawk USB560BP

  • Blackhawk USB560m

  • Blackhawk LAN560

  • Blackhawk PCI560

Please note that when using Windows Vista or Windows 7, the User Account Control (UAC) must be turned off to run tests successfully. UAC can be turned off through the user accounts feature under the control panel. Typing UAC in the search box of the control panel will present a link to disable UAC.

Reference Board Test Procedure Download

Each Runner-Lite test plan is custom built for a particular reference design and includes relevant test steps to perform structural testing, functional testing, and In-System Programming (ISP). Runner-Lite connects to the board through its standard JTAG Test Access Port (TAP).

You must register or login to access the test procedure:

[Login to access Runner-Lite files]

Download
	Please note that Runner-Lite v6.12 with not work with the TI OMAP35x EVM Test Procedure.  You must use v6.08. Requirements: Windows XP/Vista/7 (32/64-bit), 1Ghz CPU, 512MBRam, 300MB Hard Drive Space, Blackhawk USB560BP, USB560m, LAN560, or PCI560 emulator. Setup File: Runner-Lite-Installer-v6.08.exe
	TI OMAP35x EVM Test Procedure
	TI OMAP35x EVM Quick Start Guide

OMAP35x EVM

OMAP35x Evaluation Module

	Developed with Mistral Solutions, the OMAP35x Evaluation Module (EVM) enables developers to immediately start evaluating OMAP35x processors (OMAP3530, OMAP3525, OMAP3515, OMAP3503) and begin building low power applications such as portable media players, navigation devices, handheld game consoles, single board computers, data terminals, point of sale/service, software defined radio, medical applications, media controllers and numerous other products requiring low power and high performance.

Blackhawk DSP
Blackhawk is a leader in the design of Digital Signal Processing (DSP) hardware and software Development tools.  Blackhawk was first to introduce a USB JTAG Emulator for Texas Instruments DSP's and is a member of the TI Third Party Network.

Request a Test Procedure

	Please use this form to request a test procedure for a specific reference board: Move Close Request a Test Procedure * Name: Company: City: State/Country: Phone: * Email: * Reference Board Name: Manufacturer Website: Additional Comments: