USB100 Blackhawk emulator Model D

More Views

USB100 Blackhawk emulator Model D

SKU: 12139B

$149.00
The Blackhawk™ USB100v2 (Model D) controller is a very low-cost controller for basic debugging of Texas Instruments DSPs. The USB100v2 is a TI XDS100v2-compatible emulator fully supported under CCS v4 and future Texas Instruments roadmap software development environments. USB100 Blackhawk emulator. Model D. Includes: 5" cable with 20-PIN cTI header. 20-PIN to 14-PIN adapter.
Description

Details


The Blackhawk™ USB100v2 (Model D) controller is a very low-cost controller for basic debugging of Texas Instruments DSPs. Requiring no external power source, the USB100v2 (Model D) can support most of the basic features of higher priced emulators and requires no additional drivers when installed using CCS v4 or later.

The USB100v2 (Model D) is a TI XDS100v2-compatible emulator fully supported under CCS v4 and future Texas Instruments roadmap software development environments. Blackhawk’s USB100v2 (Model D) provides additional features and performance not found in other XDS100v1 emulators. The USB100v2 (Model D) provides for faster code downloads and assembly code stepping in that the USB100v2 (Model D) uses a high-speed USB2.0 (480 Mb/s) port instead of slower USB1.x (12 Mb/s) implementations.

Measuring just 2.75”L x 0.80”W x 0.65”H (7.0cm x 2.0cm x 1.5cm) the Blackhawk USB100v2 (Model D) is the smallest and most compact emulation product from a US manufacturer and is fully assembled and tested in the USA. It will support 1.8-3.3v targets with standard TI 14-pin connections and also supports the Texas Instruments compact 20-pin emulation header (cTI).

Additionally, with an optional 20cTI to 20ARM connector (available from Blackhawk), the USB100v can connect to 20-pin ARM Multi-Ice platforms. The USB100v Controller is also compatible with Code Composer Studio™ Flash-burner utility.

View Blackhawk USB100 Controller Product Page

Download Datasheet

 

Related Products

Check items to add to the cart or select all

Reviews

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.